Apluslift Ap-10SR 10,000 LB 2-Post Single Release Overhead Heavy Duty Car Lift

APlusLift AP-10SR car lift is an upgrade from the bestselling HW-10KOH-A model with an addition of single point lock release.

Specification

• CE Certified Lift Structure and Hydraulic System
• Heavy Duty Design:
• • Column Steel Thickness: 13/64″
  • Carriage Steel Thickness: 15/64″
  • Arm Steel Thickness: 15/64″
  • Carriage Yoke Thickness: 5/16″
  • Base Plate Steel Thickness: 5/8″
• Driving Mode: Dual hydraulic cylinders, chain drive
• Combo (Symmetrical and Asymmetrical) Arm Assembly:
• • Front/Rear 3 Stage reach from 22 7/8″ to 42 5/8″
  • Rear 2 Stage reach from 33 5/8″ to 52 7/8″
  • Adjustable Screw Pads 4 pieces included
  • Truck adapters 4 pieces included
• Safety Mechanism:
• • Single point safety lock release
  • Automatic arm lock restraints
  • Relief valve built in power pump to prevent overloading
  • Door guards protection rubber
  • Up-limit switch to protect cylinders working stroke used in safe length scope
  • Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life
  • Stiffened base plate 5/8″ thickness
• Control System:
• • Lifting by pressing “UP” button
  • Manual lowering operation
  • Relief valve built in power pump to prevent overloading
  • Overall Height: 143 3/16″
  • Overall Width: 134 5/16″
  • Maximum Lift height with Truck Adapters: 81″
  • Lifting height without Truck Adapters: 75″
  • Minimum Height of Arm Top: 4.5″
  • Carriage to Carriage Width (Drive through clearance): 100″
  • Column to Column Width: 109″
  • Time to full rise: 50 sec
  • Motor: 220V Single Phase 3HP (need a 30A breaker)
  • Hydraulic Oil: 3-5 gallons AW32/AW46
• Concrete Requirement: 6″ at 3500 psi (4″ for vehicles 9000LB and below)
• Anchor bolts included